12V WS2812B SK6812 INK1003 LED Strip

12V WS2812B SK6812 INK1003 LED Strip

Usually ws2812b sk6812 ink1003 led strip is 5 voltage,now we can produce 12V ,we put 2 piece DC-DC module per meter,change 12V to 5V.

The picture is 

APA102 White Led

APA102 White Led

APA102 white is a type ic for the one color White Diming control strip

and string ,This ic using the CMOS process to provide three White  LED

output driver to adjust the output with 256 gray scale and 32 brightness

adjustment ,APA with 2 signal output way , one is clock ,another is data, 

the clock and data is synchronizated ,so that the crystal cascade piece

of output movement is sychronizated.

APA102 LED And LED Strip

                  APA102 LED And LED Strip

APA102 for the three-color RGB LED dimming control string Then IC, using the CMOS process,

providing three-color RGB LED output driver to adjust the pouput with 256 gray-scale and

32 brightness adjustment APA102 with two-output way,the CLK signal by synchronizatioAPA102 LED CHIP ,

so that the crystal cascade Piece of output movements synchronized.

Features

CMOS process, low coltage, low power consumption
Synchronous of two-lane
Choose postive output or negative output RGB tri-color LED out, 8 Bit(256level) color Set,

 5Bit (32 level) brightness adjustment

Built-20mA constant current output
With self-detection signal
Built-in support for continuous oscillation PWM output can be maintained Static Screen

                                                                                              www.normandled.com

SK6812 RGBY LED Chip

SK6812 RGBY LED Chip

SK6812 RGBY is a smart LED control circuit and light emitting circuit in one controlled LED
source, which has the shape of a 5050 LED chip. Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.

The data protocol being used is unipolar NRZ communication mode. The 32-bit data is transmittedfrom the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an internal data latch, the remaining data is passed through the internal amplification circuit and sent out on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission only limited by signal transmission speed.

The LED has a low driving voltage (which allows for environmental protection and energy saving),high brightness, scattering angle, good consistency, low power, and long life. The control circuit is integrated in the LED above.
2. Main Application Field:
● Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube,LED appearance / scene lighting
● LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical equipment etc..
3. Description:
● Top SMD internal integrated high quality external control line serial cascade constant current IC;
● control circuit and the chip in SMD 5050 components, to form a complete control of pixel, color mixing uniformity and consistency;
●built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform distortion will not guarantee a line;
●The built-in power on reset and reset circuit, the power does not work;
●gray level adjusting circuit (256 level gray scale adjustable);
● red drive special treatment, color balance;
● line data transmission;
● plastic forward strengthening technology, the transmission distance between two points over 10M;

●Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec

  

                                                                                                     www.normandled.com

SK6812 3535 Mini LED

SK6812Mini 3535 LED

1. Product Overview :

SK6812mini 3535 led    is a smart LED control circuit and light emitting circuit in one 

controlled LED source, which has the shape of a 5050 LED chip. Each 

lighting element is a pixel, and the intensities of the pixels are contained 

within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color

of the pixels. The control circuit consists of a signal shaping amplification 

circuit, a built-in constant current circuit, and a high precision RC oscillator.

The data protocol being used is unipolar NRZ communication mode. The 24it  data is transmitted from the controller to DIN of the first element, and if it is  accepted it is extracted pixel to pixel. After an internal data latch, the 

remaining data is passed through the internal amplification circuit and sent 

out on the DO port to the remaining pixels. The pixel is reset after the end 

of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission only limited by signal 

transmission speed.

The LED has a low driving voltage (which allows for environmental protection and energy saving), high brightness, scattering angle, good consistency, low  power, and long life. The control circuit is integrated in the LED above.

2. Main Application Field:

● Full color LED string light, LED full color module, LED super hard and soft 

lights, LED guardrail tube,LED appearance / scene lighting

● LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical equipment etc..

3. Description:

● Top SMD internal integrated high quality external control line serial cascadeconstant current IC;

● control circuit and the RGB chip in SMD 5050 components, to form a 

complete control of pixel, color mixing uniformity and consistency;

●built- in data shaping circuit, a pixel signal is received after wave shaping 

and output waveform distortion will not guarantee a line;

●The built-in power on reset and reset circuit, the power does not work; gray level adjusting circuit (256 level gray scale adjustable);

● red drive special treatment, color balance;

● line data transmission;

● plastic forward strengthening technology, the transmission distance 

between two points over 10M;

● Using a typical data transmission frequency of 800 Kbps, when the refresh

 rate of 30 frames per sec.

Parameter
1. Input DC5v, Max 12 watts/meter 
2. sk6812mini, 1 LED = 1 pixels 
3. 60 LEDs/m, SMD3535 RGB  
4. Greyscale=256/color, 24 bits for RGB 
5. WHITE FPC 
6. FPCB width =4mm
7. 2meters/roll 
8. Cables: DC5V, DATA, GND

                                                                                                                                                   www.normandled.com

SK6822 Led Chip

SK6822 Led Chip

SK6822 is a smart LED control circuit and light emitting circuit in one controlled LED source, which has the shape of a 5050 LED chip. Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.
The data protocol being used is unipolar NRZ communication mode. The 24-bit data is transmitted from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an internal data latch, the remaining data is passed through the internal amplification circuit and sent out on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission only limited by signal     transmission speed.
The LED has a low driving voltage (which allows for environmental protection and energy saving), high brightness, scattering angle, good consistency, low power, and long life. The control circuit is integrated in the LED above.

2. Main Application Field:
● Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube,LED appearance / scene lighting
● LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical equipment etc..
3. Description:
● Top SMD internal integrated high quality external control line serial cascade constant current IC;
● control circuit and the RGB chip in SMD 5050 components, to form a complete control of pixel, color mixing uniformity and consistency;
● built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform distortion will not guarantee a line;
● The built-in power on reset and reset circuit, the power does not work;
● gray level adjusting circuit (256 level gray scale adjustable);
● red drive special treatment, color balance;
● line data transmission;
● plastic forward strengthening technology, the transmission distance between two points over 10M;

●Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec

                                                                                                         www.normandled.com

SK6812 WWA Led

                                     SK6812 WWA Led

SK6812 WWA is a smart LED control circuit and light emitting circuit in one controlled LED source, 
which has the shape of a 5050 LED chip.  Each lighting element is a pixel, and the intensities of the
pixels are contained within the intelligent digital interface input.  The output is driven by patented PWM
technology, which effectively guarantees high consistency of the color of the pixels.  The controlcircuit

consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high
precision RC oscillator. The data protocol being used is unipolar NRZ communication mode.  The 24-bit

data is transmitted from the controller to DIN of the first element, and if it is accepted it is extracted pixel

to pixel.  After an internal data latch, the remaining data is passed through the internal amplification circuit

and sent out on the DO port to the remaining pixels.  The pixelis reset after the end of DIN.  Using automatic
shaping forwarding technology makes the number of cascaded pixels without signal transmission only limited

by signal transmission speed.The LED has a low driving voltage (which allows for environmental protection

 and energy saving),high brightness, scattering angle, good consistency, low power,and long life.  The control

 circuit is integrated in the LED above.

Main Application Field:
Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube,
LED appearance / scene lighting
Description:
Top SMD internal integrated high quality external control line serial cascade constant current IC;
control circuit and the chip in SMD 5050 components, to form a complete control of pixel, color
mixing uniformity and consistency;
built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform
distortion will not guarantee a line;
The built-in power on reset and reset circuit, the power does not work;gray level adjusting circuit

(256 level gray scale adjustable);

red drive special treatment, color balance;
line data transmission;
plastic forward strengthening technology, the transmission distance between two points over 10M;
Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec

SK6812:

The default is the chips with IC integration -SK6812 WWA:

White 6000-7000K

Warm White 2700-3000K

Amber 1800-2000K

                                                              www.normandled.com

SK6812 RGBW Led Strip 4 in 1 LED

SK6812 RGBW Led

SK6812 RGBW LED chip IS 4 IN ONE led ,One 5050 LED have 4 led chip inside , They are Red, Green , Blue , White. About White ,it has Warm white , Nature white ,Cool white . and we have use this SK6812 RGBW LED CHIP on our led strip , we have make 30LEDS , 60LEDS ,72LEDS , 144LEDS . 

Those RGBW SK6812 LED STRIP is not only have RGB ,but also can mix color , mix white , then can make some different color from RGB, then you can have more choose.

Here is some pictures about SK6812RGBW Led and SK6812RGBW Led Strip:

                                                           

SK6812 LED Strip

                                SK6812 LED Strip

 SK6812 LED is similar as WS2812B APA104 LED ,they are stable and 4pin,can use the same PCB as ws2812b apa104,can be compatible with ws2812b apa104 sk6812 on controller.

Product Overview：

SK6812 is a set of smart control circuit and a light emitting circuit in one of the controlled LED source. The outer type is the same with a 5050LED chip, each element is a pixel. Pixels contained within the intelligent digital interface data latch signal shaping amplification circuit,power supply circuit, a built-in constant current circuit, high precision RC oscillator, the output is driven by the patented PWM technology,effectively guarantee the pixels in the color of the light high consistency. Data protocol using unipolar NRZ communication mode, the pixel is reset after the end of DIN, accept the data transmitted from the controller to the 24bit, the first to send data by the first pixel to pixel extraction, internal data latch, the remaining data after the internal plastic the processing circuit after shaping amplification through the DO port output began to turn to the next cascade of pixels, each pixel through a transmission signal, reduce. Pixel using automatic shaping forwarding technology, makes the number of cascade without signal
transmission limit of the pixel, only limited signal transmission speed.The LED has a low driving voltage, environmental protection and energy saving, high brightness, scattering angle, good consistency, low power,long life and so on. The control circuit is integrated in the LED above,more simple circuit, small volume, easy installation.

Main Application Field:

1.Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube, LED appearance / scene lighting
2.LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical equipment etc.

Description:

Top SMD internal integrated high quality external control line serial
cascade constant current IC;
1.control circuit and the RGB chip in SMD 5050 components, to form a
complete control of pixel, color mixing uniformity and consistency;
2.built-in data shaping circuit, a pixel signal is received after wave
shaping and output waveform distortion will not guarantee a line;
3.The built-in power on reset and reset circuit, the power does not work;
4.gray level adjusting circuit (256 level gray scale adjustable);
5. red drive special treatment, color balance;
6. line data transmission;
7. plastic forward strengthening technology, the transmission distance
between two points over 10M;
8.data transmission frequency up to 800Kbps, when the refresh rate of 30
frames per second, a cascade of not less than 1024;
9. built-in powerpolarity protection module, powerpolarity will not damage.                                                               

 Pictures:  

                                          www.normandled.com